Please note when ordering:- With all types of
gates - single, double, side entrance or arch - we use the
width of the opening itself to classify the width of
the gate. For example the Frome Arch Gate No 47 is made to
fit a 3 ft opening. The actual width of the frame of the
gate is less than 3 ft to allow for the hinges and latch.
The same principle is used to measure the height of gates.
Continuing the example of the Frome Arch Gate No 47, this is
made to fit an arch shaped opening which is 6 ft high. The
actual frame of the gate will be less than this to allow about 2
ins ground clearance and 2 ins clearance at the top.
Gates can be supplied as "Left Hand Hung" where the hinges
are on the left and the gate opens away from one. Alternatively
they can be "Right Hand Hung" where the hinges are on the right.
All gates are supplied with either build-in or screw-on
hangars and latch plates. Unless otherwise requested screw-on
fittings will be supplied).
For double, or driveway gates, centre stop plates and hold
back catches can be supplied.
There is a comprehensive range of gate posts, listed later
on.
All gates are supplied finished in primer paint only. A top
coat should be applied as soon as possible.
A hot dip galvanised finish is available at extra cost: £ 25
for a single gate and £ 30 for a Side Gate or Arch Top Gate. All
prices include VAT..
We are able to make special sizes and styles - this is an
important part of our business. Please let us know your
requirements and we will be happy to quote.
Email us at
sales@wessexforge.co.uk, fax us on 01749 870250 or
write to:-
Wessex Forge
Unit 5 Lodge Hill Industrial Estate
Westbury sub Mendip
Wells Somerset
BA5 1EY
Phone: 01749 870250 Fax: 01749 670150
Ordering is simple - post a cheque (made payable to Wessex
Forge) for the full amount. Please include your address and post
code and a daytime telephone number. There may be an extra
delivery charge for parts of Scotland , Wales and Northern
Ireland - please contact us for details. |